Your garage door rollers may require lubrication or perhaps replacement, but how can you know? Every time the door opens or closes, you’ll start to hear these unpleasant noises. The weight of the garage door is supported by the rollers, which are weight-bearing. However, because they don’t have time to warm up, they become fatigued from carrying the weight. Keep your garage door in top shape to maximize the usage of your investment. If your garage door is squeaking, it might be unsafe for residents. In this blog post, not only do you know when to replace the garage door rollers, but also how to do so correctly.

The maintenance of door rollers needs the following steps to keep a check on:

Cut Off The Electricity

It is extremely unsafe to work on a plugged-in garage door. Take the time to turn the electricity off from doors before you start working and disconnect the garage door opener cable.

Keep Garage Door Rollers lubricated

You should not utilize oil lubricants, no matter what type of material you’re working with; nylon, steel, or rubber. Degreasers in oil lubricants cause garage doors to creak, so lubricate them. Oil lubricants, on the other hand, are exactly the wrong choice. Lubricate all of your rollers using silicone-based lubricant, except for steel rollers.

  • Steel Rollers: It is necessary to apply lubricant directly to the innermost ball-bearings of steel rollers.
  • Nylon Rollers: To keep the shaft and rollers moving smoothly, lubricant should be applied to the outside of the shaft.
  • Nylon Rollers with open bearing: These rollers don’t require any lubrication. If you don’t grease them, they’ll last the lifetime of your garage.

Nylon vs Steel Rollers

If you’re in the market for new garage door rollers, which is better for nylon or steel? Despite being more costly than steel rollers, nylon garage door rollers are worth the money. They are more durable, quieter, and will endure for more than a decade.

4 Steps to Replace Garage Door Rollers

  1. Unplug the garage door opener to get things started.
  2. Using a winding bar, begin unwinding the springs.
  • It is important to know that rollers and hinges should be replaced when the door is closed. To begin, though, the springs must be loosened.
  • Then, secure the cable on the spring’s shaft.
  1. The rollers of the garage door may now be removed in the third step.
  • Remove the screws that are keeping the hinge from moving.
  • Tap the hinge with a hammer to release it.
  • Before going to the next hinge or roller, make sure that you replace the one you just removed.
  • The old roller may now be removed.
  1. Replace the old roller with the new one.
  • The roller should be inserted into the hole with care.
  • The roller should be reinserted into the track.
  • Align the hinge with the bolts. Tap the bolts back and tighten the nut to secure them in place.
  • Wind the garage door springs back and adjust the spring tension to its initial tension.


Please enter your comment!
Please enter your name here